RFID credit card reader name:
New Cheap Selling Waterproof R36-2D QR code Access Control RFID Credit Card Reader
Basic parameters:
projet |
paramètre |
projet |
paramètre |
Type de lecteur de carte |
Carte EM ou carte Mifare |
Type de code-barres |
QR, code unidimensionnel/bidimensionnel |
Méthode de communication |
Wiegand 26/34/RS232/RS485/TTL |
Mode de décodage |
Décodage d’images |
Sens de lecture (code-barres) |
Angle de 45° avec l’objectif comme point central |
Caractéristiques du code de numérisation |
Induction automatique, invite de buzzer |
Tension de fonctionnement |
8 à 12 V |
Courant de travail |
800mA |
Distance de lecture de la carte (carte) |
3 ~ 6CM |
Vitesse de lecture |
|
Distance de lecture (code QR) |
0-20cm |
Qualité des matériaux |
Cadre en alliage de zinc + panneau acrylique |
Humidité de travail |
10% ~ 90% |
Température de fonctionnement |
-20°C~70°C |
Système d’exploitation |
WindowsXP/7/8/10), Linux |
Taille |
86mm×86mm×18mm |
Voyant |
Lumière de travail bleue, lumière de rétroaction verte |
Poids |
150 grammes |
autre |
Lumière : état de veille : la lumière bleue est toujours allumée ; État de la lecture de la carte/du code de numérisation : le voyant vert est allumé pendant environ 0,5 s
Klaxon intégré : buzzer |
Line sequence definition:
Wiegand 26/34 |
Le port RS485 |
Le RS232 |
Ligne rouge : 12v |
Ligne rouge : 12v |
Ligne rouge : 12v |
Fil noir : GND |
Fil noir : GND |
Fil noir : GND |
Ligne verte : D0 |
Fil marron : 485A |
Ligne bleue : RX |
Ligne blanche : D1 |
Orange : 485B |
Ligne jaune : TX |
Precautions:
1. The access control reader cannot store user data and information, and cannot add card users, password users, and fingerprint users. It is only an expanded card or password unlocking tool, which needs to rely on access control integrated machines, card time attendance machines, multi-door controllers and other equipment to use.
2. When installing/removing, please turn off the power first and do not operate with power.
3. The maximum reading distance is in a non-interference environment, the card reader is installed in the correct way, and the card is measured parallel to the surface of the card reader, any electromagnetic interference environment will affect the reading distance.
4. Do not install the card reader on the surface of magnetic or metal objects. Magnetic and metal materials will seriously affect the RF signal
5. Do not install the card reader near devices that produce interference electromagnetic fields, such as motors, AC/DC converters, UPS, relays etc.
6. The power supply should ensure sufficient power, try to use a linear power supply, and the door lock and controller should be powered separately. Install the power supply as close as possible to the electrical equipment to avoid interference and transmission loss.
7. It is recommended to pay attention to separate the strong and weak current when wiring, and the separation requirement is greater than 20cm. The power cord should be a multi-stranded wire with a sufficiently thick wire diameter.
Pictures: